400G QSFP-DD DR4+ with dual CDR 2 km, 4x λ1310 nm, MTP/MPO-8/12 APC, Singlemode

Universal QSFP-DD Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 400GBASE-DR4+ Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 425 Gbit/s (4x 106.25 Gbit/s)
Up to 2 km via Singlemode OS2
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • 4x 1310 nm
  • 2 km
  • 425 G
  • MTP/MPO-8/12
Protocols
  • 100G ETH
  • 400G ETH
  • 4x 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
D.134HG.2:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor QSFP-DD
Connector / Polish MTP/MPO-8/12 APC
Interface Singlemode
Type DR4+
Distance 2 km
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 425 Gbit/s
Bandwith Per Lane 106.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 12 W
CDR TX and RX
SGMII No
Inbuilt FEC Yes
Powerbudget (dB) 4 dB
Transmit min/max per lane -2.4 dBm / 4 dBm
Receiver min/max per lane -6.4 dBm / 4.5 dBm (overload)
Wavelength TX (Typical) 4x 1310 nm
Wavelength TX (Range) 1304.5 - 1317.5 nm
Wavelength RX (Typical) 4x 1310 nm
Laser EML
Receiver Type PIN
Modulation PAM4
Transmit and Dispersion Penalty 3.4 dB
Extinction Ratio 3.4 dB
Supported Protocols 4x 100G Ethernet, 400G Ethernet, 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista 3rd_Party QDD-400G-XDR4 compatible
  • Arista QDD-400G-XDR4 compatible
  • Cisco Systems QDD-4X100G-FR-S compatible
  • Edge Core ET502-FR4 compatible
  • Juniper QDD-400G-DR4 compatible
  • Juniper QDD-4X100G-FR compatible
  • Nokia Networks 3HE15274AA compatible
Your vendor / compatibility is missing?

What customers say

I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.

Poul Pedersen Network consultant / Ipwork consult ApS

A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.

Ten out of ten, absolutely recommended!

Roman Beyerle CODESYS GmbH
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day. With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably. Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver. We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field. Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers CEO/CTO, Oufti Connections
More